Metal Roof Repair in Lubbock, TX

Metal roof repair in Lubbock fixes the parts of a metal roof that fail first: worn rubber washers on exposed fasteners, open seams and laps, torn or hail-damaged panels, and loose trim. It covers homes, barns and shops. Roof Repair Lubbock TX connects you by phone, 24/7, with an independent local roofer who works on metal.

Call (000) 000-0000

Free call. Open 24/7. A participating local roofer answers.

A roofer replaces screws with new washers along the ribs of a galvalume metal roof on a rural shop building

Why metal roofs need repair

Metal roofs are common across the South Plains, on homes in town and on barns, shops and equipment sheds in the country. They last a long time, but they are not maintenance free. The steel or aluminum panels usually outlast the small parts that seal them, and the constant expansion and contraction from hot West Texas days and cold nights works those parts loose.

Common metal roof problems

  • Worn fastener washers. On exposed-fastener roofs, each screw has a rubber washer. Sun breaks the rubber down, and screws back out as the panels move, leaving small holes.
  • Open laps and seams. Where panels overlap, sealant can dry and shrink, letting wind-driven rain in.
  • Hail dents and punctures. Large hail can dent panels and, in severe storms, tear or puncture thinner metal.
  • Loose or missing trim. Ridge caps, rake trim and eave trim can lift in high wind.
  • Rust. Scratches, cut edges and places where water sits can corrode over time.
  • Flashing at penetrations. Pipe and vent boots on metal roofs crack in sun just as they do on shingle roofs.

How metal roof repairs are made

Fasteners

Backed-out or worn screws are replaced, often with a slightly larger diameter screw so it bites into fresh metal, each with a new washer. On older roofs, replacing fasteners across the whole roof can be a sensible step before leaks spread.

Seams and laps

Old sealant is cleaned out and the lap is resealed with a sealant made for metal roofing. Standing seam roofs may need clips or seams reseated.

Panels and trim

Damaged panels can be replaced individually when matching profiles are available. Torn trim is refastened or replaced. Small punctures may be patched with metal and sealant, though larger holes need a new panel.

Coatings

On older barns and shops, a roof coating system can seal fasteners and seams across the whole roof. It needs proper surface preparation to bond.

Hail and metal roofs

Metal roofs handle hail differently from shingles. A dent may be purely cosmetic and still keep water out, or it may crack a coating or open a seam. Many insurance policies treat cosmetic and functional damage differently, so read your policy and have a roofer document whether dents have affected the roof's ability to shed water.

Exposed-fastener metal compared with standing seam
Exposed fastenerStanding seam
Where you see itBarns, shops, many homesHomes and commercial buildings
Main upkeepFastener washers and lap sealantSeams, clips and trim
Common leak pointScrews that have backed outPenetrations and end laps
Repair approachRe-screw, reseal, replace panelsReseat seams, reflash, replace panels

What affects the cost and time?

The number of fasteners to replace, whether matching panels are still produced, the height and pitch of the building, and whether the roof can be walked safely all matter. Large agricultural buildings take longer simply because of their size. Rust that has spread beneath the surface can turn a repair into panel replacement.

Before the roofer arrives

Note where leaks appear inside and whether they happen in every rain or only with wind. Move equipment or stored goods away from drips. Do not walk a metal roof yourself, especially when it is wet, dusty or frosty; metal is slick and falls are common.

When is a metal roof problem urgent?

It is urgent when wind has peeled back a panel or trim and it is flapping, when a panel is punctured and rain is coming, or when water is reaching electrical equipment inside a shop or barn. A loose panel can tear free in the next gust and cause more damage, so call right away.

Frequently asked questions

Why does my metal roof leak around the screws?

The rubber washers under each screw break down in sun, and panel movement backs screws out. Replacing them with new fasteners and washers usually stops these leaks.

Can hail damage a metal roof?

Yes. Large hail can dent panels and, in severe storms, puncture thinner metal. Some dents are cosmetic, while others crack coatings or open seams.

Can one metal roof panel be replaced?

Often, if a matching profile and color is available. Older or discontinued profiles can be harder to match.

Are roof coatings worth it on an old barn roof?

A properly applied coating system can seal fasteners and seams and extend the life of a sound metal roof. It does not fix panels that are rusted through.

Is it safe to walk on a metal roof?

It is risky. Metal is slippery when wet, dusty or frosty, and some panels dent underfoot. Leave roof access to a roofer with fall protection.

Call about metal roof repair in Lubbock

Describe the problem and a participating independent roofer will tell you what they can do and when.

Call (000) 000-0000 now

Free call, no obligation. Open 24/7.

Call now: (000) 000-0000

Roof trouble? Talk to a local roofer.

Hail, a leak or storm damage, day or night. One free call connects you with a participating independent roofer serving Lubbock.

Call (000) 000-0000