Why gutters matter in a dry climate
Lubbock does not get much rain in an average year, but when it rains, it often comes down hard in a short storm. Gutters carry that burst of water away from the house. Without them, or with gutters that overflow, water pours off the roof edge, splashes against walls, soaks the fascia boards and collects next to the foundation. In the expansive clay soils found in parts of the South Plains, water pooling at the foundation can contribute to soil movement.
Common gutter, soffit and fascia problems
- Hail dents. Aluminum gutters dent easily. Minor dents may only be cosmetic, but crushed sections can hold water or split.
- Sagging and pulling away. Hangers loosen or the fascia behind them rots, and the gutter tilts the wrong way.
- Leaking seams and end caps. Sealant dries and cracks, and water drips at the joints.
- Loose or crushed downspouts. Wind and hail knock downspouts loose, and water dumps beside the foundation.
- Rotted fascia. Long-term overflow or a missing drip edge lets water soak the fascia board.
- Damaged soffit. Soffit panels under the eaves can be knocked loose by wind or damaged by pests, and vented soffit is part of the attic's intake ventilation.
How gutter repairs are done
Rehanging and resealing
Sagging gutters are rehung with new hidden hangers driven into sound fascia, and the slope is reset so water runs toward the downspouts. Leaking seams and end caps are cleaned and resealed.
Replacing damaged sections
Badly dented or split sections are replaced. Seamless aluminum gutters are formed on site to length, which reduces the number of seams.
Fascia and soffit
Rotted fascia boards are cut out and replaced, then wrapped or painted, before gutters are rehung. Damaged soffit panels are replaced, keeping vented panels where the attic needs intake air.
Drip edge
The metal drip edge at the roof's edge guides water into the gutter. If it is missing or bent, water can run behind the gutter and rot the fascia, so it is checked as part of the job.
| Situation | Usual approach |
|---|---|
| A few loose hangers, sound fascia | Rehang and reset slope |
| Leaking corners and seams | Clean and reseal |
| Hail dents across most runs | Replace affected runs |
| Rotted fascia behind the gutter | Replace fascia, then rehang or replace gutter |
What affects the cost and time?
The length of gutter involved, whether the fascia behind it is rotten, the height of the eaves, the number of corners and downspouts, and whether you are matching an existing color all change the job. Gutter work is often done alongside a roof repair or replacement, since the drip edge and roof edge are involved.
Before the crew arrives
Note where water overflows during rain, which often shows where the slope is wrong or a downspout is blocked. Clear items from beneath the eaves and make sure ladders can reach each side of the house.
When is it urgent?
A gutter hanging off the house can fall and injure someone or damage a vehicle, so have it taken down or secured promptly. Most other gutter problems are not emergencies, but fixing them before storm season keeps water away from walls and the foundation.
Frequently asked questions
Do hail dents in gutters need repair?
Light dents may be cosmetic. Dents that crush the gutter, hold water or split seams affect function and are worth repairing or replacing.
Why are my gutters pulling away from the house?
Usually because hangers have loosened or the fascia board behind them has rotted. The fascia often needs repair before the gutter can be rehung securely.
What is the difference between soffit and fascia?
Fascia is the vertical board along the roof edge that the gutters attach to. Soffit is the panel under the eaves, between the fascia and the house wall.
Are seamless gutters better?
Seamless gutters are formed to length on site, so they have fewer joints that can leak. Corners and downspout outlets still need sealing.
Should gutters be replaced with a new roof?
Not always, but a roof replacement is a convenient time to check the drip edge, fascia and gutters, since they all work together at the roof edge.
